ZRsuns 40W HV CO2 laser power source for 800/700mm CO2 laser tube
rubylasertech
$ 89 / Piece
ZR-40WB Laser Power Supplies
Feature
1.Good compatibility: This 40w laser power source can be applicable to most brands of 30Watt, 40Watt, 50Watt CO2 laser tube made by different factories.
2.The Co2 laser power source adds a new function, that is timely scene judging which part is damaged on laser tube or laser power supply
3. The blue laser power source has open circuit protection: Under the condition of good protective earth, the 40watt laser power supply can work in open-circuit for a short time, which could avoid the damage to laser power supply.
4.Because of many protect function, this green signal terminal laser power source dramatically lengthen the lifetime of glass type CO2 tube.
5. This blue laser power source has fast response speed and effect.
6.Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power on this 40w laser power source.
7.Easy Control: The start and stop of Co2 laser power can be easily controlled by TTL level on this 40W laser power supply. And it has protection switch to test the external water, ventilation, etc.
8. The green signal terminal laser power source has feedback interface which can be used in closed-loop control and testing the working current of laser.
9.This 40 watt CO2 power supply has an aluminum alloy housing and a dedicated interface for the stamp engraving machine: G/P/L/G/IN/5V. In addition, it also has; DC24V/5V output
Specification
lnput Input voltage:AC220V±10% (AC110V specified while order)
AC frequency:47~440HZ
Maximum input power: 350W
Maximum input current :1.5A
Output Maximum output voltage:25KV
Maximum output current:24mA
(depending on the laser tubes of different manufacturers)
Efficiency More than 90% (Full load)
Response speed Not more than 1ms
Control lnterace TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)
Insulation lnput-output AC 1500V 1 minutes not more than 10mA
lnput-shell AC 1500V 1 minutes not more than10mA
Output-shell Connection
Open Circuit Protection Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)
Environmental Requested Working temperature -10℃~50℃
Storage of temperature -20℃~75℃
Relative Humidity Maximum 85%RH (non-condensing)
Altitude 100,000 feet of work
200,000 feet of storage,dose not work
Cooling methods Forced air cooling (fan cooling)
Dimensions (LxWxH) 163mmx143mmx83mm
Feature
1.Good compatibility: This 40w laser power source can be applicable to most brands of 30Watt, 40Watt, 50Watt CO2 laser tube made by different factories.
2.The Co2 laser power source adds a new function, that is timely scene judging which part is damaged on laser tube or laser power supply
3. The blue laser power source has open circuit protection: Under the condition of good protective earth, the 40watt laser power supply can work in open-circuit for a short time, which could avoid the damage to laser power supply.
4.Because of many protect function, this green signal terminal laser power source dramatically lengthen the lifetime of glass type CO2 tube.
5. This blue laser power source has fast response speed and effect.
6.Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power on this 40w laser power source.
7.Easy Control: The start and stop of Co2 laser power can be easily controlled by TTL level on this 40W laser power supply. And it has protection switch to test the external water, ventilation, etc.
8. The green signal terminal laser power source has feedback interface which can be used in closed-loop control and testing the working current of laser.
9.This 40 watt CO2 power supply has an aluminum alloy housing and a dedicated interface for the stamp engraving machine: G/P/L/G/IN/5V. In addition, it also has; DC24V/5V output
Specification
lnput Input voltage:AC220V±10% (AC110V specified while order)
AC frequency:47~440HZ
Maximum input power: 350W
Maximum input current :1.5A
Output Maximum output voltage:25KV
Maximum output current:24mA
(depending on the laser tubes of different manufacturers)
Efficiency More than 90% (Full load)
Response speed Not more than 1ms
Control lnterace TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)
Insulation lnput-output AC 1500V 1 minutes not more than 10mA
lnput-shell AC 1500V 1 minutes not more than10mA
Output-shell Connection
Open Circuit Protection Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)
Environmental Requested Working temperature -10℃~50℃
Storage of temperature -20℃~75℃
Relative Humidity Maximum 85%RH (non-condensing)
Altitude 100,000 feet of work
200,000 feet of storage,dose not work
Cooling methods Forced air cooling (fan cooling)
Dimensions (LxWxH) 163mmx143mmx83mm
Browse Suppliers
Explore More Choices! Browse our full range of categories to compare similar products and discover the best suppliers for your business.
Broaching Machine
Get Verified Sellers Of Broaching Machine