Apply K 2 Paste

Surface Innovators LLP

1. Removal of oil - SI- 56 (Soak cleaner, powder - 50 gm/lit.)
2. K-2 paste is to be applied on the weld seam & surrounding area with a brush.
3. Leave the K-2 paste on the weld seam for 30-45 minutes depending on the thickness of the oxide scale.
4. Brush the surface with a plastic bristled brush and then wash surface thoroughly with water.
5. Next apply K-2 passivation solution and and leave it for 20-25 minutes.
6. Finally clean the surface thoroughly with water.