300/200W HV CO2 laser power supplyo for large power CO2 tube, power supply for 200/300Watt CO2 laser tube for knife die cutter

rubylasertech

ZR-200/300W CO2 Laser Power Supplies

Feature:
 1.This analog signal power supplies have easy control: The analog signal power supplies use high or low level for control. The use of TTL-level control can realize start and stop quickly. At the same time the analog signal power supplies have a protection switch, testing is made by external water and ventilation 
2.This 200W power supplies use 4PCS high quality flybacks/transformers which can make sure the 200W power supplies has stable voltage and current output to the load.
3. The 200W power supplies have good compatibility : This 200W power supplies can match with RECI,Yongli,SPT,EFR,Weiju and other brand 200W CO2 tube,besides this feature, the 200W power supplies also have strong adaptability and fast response, engraving or cutting benefits good effect.
4.This analog signal power supplies use ordinary H/L/P/G/IN/5V interface to receive control signal. It adopts aluminum upper cover and base, and galvanized plate casing.on this analog signal power supplies.
5.The  laser power control is simple, the 200W power supplies can use 0-5V analog signal or PWM signal for laser power control.
 6.This folding CO2 tube power supplies have stable working performance: Each folding CO2 tube power supplies have been much more testing procedures and under full load high temperature (52~55 degrees celsius) 24 hours of aging, which ensure the stability of each folding CO2 tube power supplies.
7.The folding CO2 tube power supplies have good protection feature: The folding CO2 tube power supplies have open circuit protection to make this folding CO2 tube power supplies work for a short time in the open state, so as to make it avoid the laser tube broken.

Specification:
Input Input voltage AC220V±10% (AC110V specified while order)
AC frequency 47~440HZ
Maximum input power 1300W
Maximum input current 5.9A
Output Maximum output voltage 52KV
Maximum output current 36mA
(depending on the laser tubes of different manufacturers)
Efficiency More than 90% (Full load)
Response speed Not more than 1ms
Control lnterace TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)
Insulation lnput-output AC 1500V 1 minutes not more than 10mA
lnput-shell AC 1500V 1 minutes not more than10mA
Output-shell Connection
Open Circuit Protection Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)
Environmental Requested Working temperature -10℃~50℃
Storage of temperature -20℃~75℃
Relative Humidity Maximum 85%RH (non-condensing)
Altitude 100,000 feet of work
200,000 feet of storage,dose not work
Cooling methods Forced air cooling (fan cooling)
Dimensions (LxWxH) 390mmx240mmx105mm